4 Ways to Complete a Tree Stump Removal

You removed the tree that simply didn't fit in your yard, but now you have to deal with the stump. Unexpectedly, getting rid of it is difficult. 

But do not worry! Here are 5 methods for getting rid of a tree stump from your property.



4 Different ways that you can get rid of your annoying tree stump

1. Removing manually

This is the best method if you are a DIY person. But you have to buy or rent these tools:

  • A Mattock

  • A bowing saw

  • An Ax

  • A digging bar

  • Safety gear(Work gloves & steel toe boots)


Wondering how to use them? Follows these steps:

  1. Use the mattock to dig the stump and loosen the dirt. 

  2. Now, remove the loose dirt.

  3.  Again use the mattock to separate the roots from the stump.

  4.  Keep on digging until the taproot area and clear it.

  5.  Now use the ax or the bow saw to cut the taproot. 

  6. Once the taproot’s been cut, you may wiggle and pull out the stump. 


Note: You may need up to 12 hours in a manual tree stump removal process

2. Stump grinding

Tree stump removal has become easier after the advent of stump grinders. You can get these large machines for rent between $100 and $200. 


Firstly, clear off the debris and cut the above stump section with your chainsaw. Next, place the machine on the stump and grind it until it’s 4 inches below the ground.  



Pro tip: Fill the hole with wood chips and cover with grass or topsoil to avoid tripping.


3. Using chemicals

The least labor-intensive way to tree stump removal is by using chemicals. You need to follow these steps:


  1. Cut off as much as the tree stump above the ground.

  2. Drill holes in the left-behind tree stump.

  3. Fill the holes with water, and then mix potassium nitrate into them. 

  4. Soak the area over the ground and cover with plastic wrap.

  5. Place mulch and pour water again to retain the moisture.

  6. Periodically, check on the progress and nitrogen and water.

  7. Check for a spongy stump after about six weeks. Use an ax to remove the stump.


If you think the chemical isn’t working, you may proceed on to follow the burning method.

4. Burning the stump

This method doesn’t require much, but you have to follow the safety measures. But, first, collect these elements:

  • A power drill

  • Fuel oil(Kerosene preferably)

  • Tree stump removal product(available on Amazon)


 Follow these below steps to burn a stump:

  1. Make holes with the drill and sprinkle the product in them

  2. Pour the fuel oil.

  3. Burn the stump and let it flame

  4. Once done, cover the area with topsoil.


Note: Check for acceptance of kerosene use if you stay in a residential neighborhood.

Conclusion

Enough of these DIY headaches, when you have a professional in hand. Tree stump removal Rochester NY can make your job easier and safer. While you are safe, your stump will be gone in no time. If you are in Rochester NY, call Branch Specialists to handle your stump. 


Comments

Popular posts from this blog

10 Benefits of Hiring a Tree Service Company: Unlock the True Potential of Your Trees with Branch Specialists Rochester NY

Problems of Stump Removal with Chemicals

Comprehensive Tree Service in Rochester, NY by Branch Specialists Rochester NY